the C 420E is a twin mount back electret condenser microphone and Each microphone has individually adjustable angled solid shafts, Inline phantom power adaptor contains a switchable 10 dB pad and bass cut filter, 309mm long in satin black. Designed for us in places of worship, conferencing, broadcasting and other places requiring twin microphone for backup / fail safe operation. Twin mount back electret condenser microphone with a cardioid polar pattern. Constructed from high quality brass each microphone is fixed to solid shafts which can be individually adjusted 180 degrees for correct vertical angle. Phantom power required 9 – 48 Volts dc. The inline phantom power adaptor contains a switchable 10 dB pad and bass cut filter(-4dB per octave at 400 Hz to –6dB per octave at 100 Hz).
Twin mount back electret condenser microphone Constructed from high quality brass
Each microphone has individually adjustable angled solid shafts
Phantom power required 9 – 48 Volts
Inline phantom power adaptor contains a switchable 10 dB pad and bass cut filter
Two independent microphones offers fail safe operation
Terminating in a 5pin Male XLR
Microphone Type - Electret Condenser
Spec Sheet available - Yes
Maximum Frequency Response (Bandwidth):
18 kHz
Maximum Frequency Response (Bandwidth):
18000 Hz
Minimum Frequency Response (Bandwidth):
50 Hz
Minimum Frequency Response (Bandwidth):
0.05 kHz
Impedance:
200 ohm
Sensitivity:
-44 dB
Signal to Noise Ratio:
120 dB
DC Voltage:
48 Volts
Sensitivity:
-44.0dB +/- 3dB @ 1Khz (0db =1V/Pa)
Power Requirements:
9 to 48 V
SM 80SN-RF LATCH
- Tiny Q Through Table Microphone Shock Mount with Latching Switch
SM 80SN-RF PTT
- Tiny Q Through Table Microphone Shock Mount with PTT Switch
